gsimania Posted October 21, 2009 Report Share Posted October 21, 2009 Link to comment Share on other sites More sharing options...
D-Power Posted October 21, 2009 Report Share Posted October 21, 2009 for sure it doesn't works with blank default programmed PCF7935 transponders. if your machine is a clone of AD900 Pro and the chinese has cloned it right, I think you have to use the AD AKTP30 precoded pcf7935 transpoders. [edit] in any case is no good to use/buy cloned devices, both for you and for developpers of original devices. With cloned devices, you don't have techincal support, you don't have guarantee against damages of the device and damages that the device can make, there is the risk that you can't upgrade your machine to have new features, so the initial save of money can be a waste of money in the future, there is always the risk that the producer of original device locks cloned devices if you try to upgrade it. Link to comment Share on other sites More sharing options...
gsimania Posted October 21, 2009 Author Report Share Posted October 21, 2009 Thanks D-Pоwer Link to comment Share on other sites More sharing options...
decker Posted October 21, 2009 Report Share Posted October 21, 2009 you wont get much help on this forum if using a chinese copy machine, i would hope not anyway. Link to comment Share on other sites More sharing options...
gsimania Posted October 21, 2009 Author Report Share Posted October 21, 2009 Link to comment Share on other sites More sharing options...
ponsaloti Posted October 21, 2009 Report Share Posted October 21, 2009 If I give you my AD password, you can ask them why it wont work. Link to comment Share on other sites More sharing options...
rapidlocks Posted October 21, 2009 Report Share Posted October 21, 2009 I have to agree , buying these copy machines does no more than help kill future development , devalues the trade and is ethically wrong in every way. far too many knock off nigels , and i too would be very dissappointed if help was offered on these from any forum. but as a little advice , buy original equipment and you wont get such problems , buy knock off and get turned over. and yes thats also my opinion too. Link to comment Share on other sites More sharing options...
gsimania Posted October 21, 2009 Author Report Share Posted October 21, 2009 Link to comment Share on other sites More sharing options...
3D Group Posted October 21, 2009 Report Share Posted October 21, 2009 You do now and you may find AD may ban you from buying from them if they read this forum. You have bought a counterfit product and companies are trying hard to stop it. I also guess the machine you have is NOT a AD900Pro but just a KeyCrypt. The AD900 Pro was produced to stop copy machines and in theory it has been made so companiees cannot be made. Link to comment Share on other sites More sharing options...
petercoulson Posted October 22, 2009 Report Share Posted October 22, 2009 I have to agree , buying these copy machines does no more than help kill future development , devalues the trade and is ethically wrong in every way.far too many knock off nigels , and i too would be very dissappointed if help was offered on these from any forum. but as a little advice , buy original equipment and you wont get such problems , buy knock off and get turned over. and yes thats also my opinion too. Is it so wrong to take a risk with a copy machine? If there are copyright issues that would be for the manufacture to sort and they dont have to offer help to the end user when problems arise, is this so different to those with an easyentrie machine copying locksmiths own profiles or using another make of 1a to a genuine yale? Link to comment Share on other sites More sharing options...
gsimania Posted October 22, 2009 Author Report Share Posted October 22, 2009 Link to comment Share on other sites More sharing options...
keithm Posted October 22, 2009 Report Share Posted October 22, 2009 Why delete the thread. You asked a valid question and you have your answer, not many will help for their own reasons and I for one support that =D> Link to comment Share on other sites More sharing options...
gsimania Posted October 22, 2009 Author Report Share Posted October 22, 2009 Link to comment Share on other sites More sharing options...
Gray Posted October 22, 2009 Report Share Posted October 22, 2009 Why delete the thread. You asked a valid question and you have your answer, not many will help for their own reasons and I for one support that =D> I agree with keithm why delete the post, it should be left on so that people can read it and don't make the same silly mistake you have made. Think of it as helping others. Link to comment Share on other sites More sharing options...
Lee Posted October 22, 2009 Report Share Posted October 22, 2009 What transponder should i use so i can use all the features of AD900? *Advanced Diagnostics sell a special transponder for Ad900(AKTP30). *Elme tools sell also special transponder for Mega Copy. for sure it doesn't works with blank default programmed PCF7935 transponders.if your machine is a clone of AD900 Pro and the chinese has cloned it right, I think you have to use the AD AKTP30 precoded pcf7935 transpoders. I knew already that they will not get help in this forum. never mind:) I will try to find the answers yourself. Along with the back lash, Did you not get the answer from D-Power in Italy? Lee Link to comment Share on other sites More sharing options...
hibsjo(SCO) Posted October 22, 2009 Report Share Posted October 22, 2009 you pays your money you take your chances! Not everyone can buy authentic machines for whatever reason. who buys cheap keys from suppliers which are made in china? Who buys COPY keys(ie not originals) and sells them to the trade? Copywrite is one of these GREY areas unanswered by a lot of people, Im sure all the car manufacturers would try and argue that people copying/selling there keys and remotes are breaching "copywrite"? one mans "brand protection" is another mans "breach of competion laws" so grey is this area . so for to chastise someone for what they have done (for whatever reason) is in my eyes unfair incoming! carry on! Link to comment Share on other sites More sharing options...
keithm Posted October 22, 2009 Report Share Posted October 22, 2009 Well he's so happy he's deleted his posts He admitted in one of them that he new what he was buying, a cheap copy, and also commented on the fact that he expected flak. He half knew what to expect thats why he's been so quick to remove all trace that he's been here You make ya bed Link to comment Share on other sites More sharing options...
gsimania Posted October 22, 2009 Author Report Share Posted October 22, 2009 keithm you're funny =D> Link to comment Share on other sites More sharing options...
keithm Posted October 22, 2009 Report Share Posted October 22, 2009 I know Link to comment Share on other sites More sharing options...
decker Posted October 22, 2009 Report Share Posted October 22, 2009 you pays your money you take your chances!Not everyone can buy authentic machines for whatever reason. who buys cheap keys from suppliers which are made in china? Who buys COPY keys(ie not originals) and sells them to the trade? Copywrite is one of these GREY areas unanswered by a lot of people, Im sure all the car manufacturers would try and argue that people copying/selling there keys and remotes are breaching "copywrite"? one mans "brand protection" is another mans "breach of competion laws" so grey is this area . so for to chastise someone for what they have done (for whatever reason) is in my eyes unfair incoming! carry on! its not realy a case of chastising, just a case of who gives you support. i paid full money for a genuine product and get support from AD and AD members. The guy in question paid a lot less for a cloned copy and should ask the supplier for support. hope he speaks chinese Link to comment Share on other sites More sharing options...
ironplanet uk900 Posted October 22, 2009 Report Share Posted October 22, 2009 keithm you're funny =D> Hes also inteligent, knowledgable and always puts a good point of view..... Link to comment Share on other sites More sharing options...
toofatbyfar Posted October 22, 2009 Report Share Posted October 22, 2009 Hes also inteligent, knowledgable and always puts a good point of view..... are you thinking about getting new machinery planet??/ Link to comment Share on other sites More sharing options...
Lee Posted October 22, 2009 Report Share Posted October 22, 2009 He's not but I might be in the near future so TOTALLY agree with Planet As for the thread & panic editing Welcome to the forum gsimania, nice to mix it up on your first topic. Lee Link to comment Share on other sites More sharing options...
keithm Posted October 23, 2009 Report Share Posted October 23, 2009 Why thank you chaps Link to comment Share on other sites More sharing options...
lockdecoders Posted October 24, 2009 Report Share Posted October 24, 2009 We are not too unhappy. It took the chinese 2 years to copy the Transpronics machine which they call the AD900. If it took them that long to make a bad copy of this machine then we have many years to go. The machine doesnt do all that the original does. Since then we have brought out the Key-Crypt and then the Key-Crypt Pro, also called the AD900 Pro and Mega Copy and the security is very good on these machines. We are also continuosly working to catch the chinese out with our web security updating. Pete Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now