paschal57 Posted June 22, 2021 Report Share Posted June 22, 2021 Can anybody identify this WMS patio lock key Link to comment Share on other sites More sharing options...
CDH Posted June 22, 2021 Report Share Posted June 22, 2021 Link to comment Share on other sites More sharing options...
CDH Posted June 22, 2021 Report Share Posted June 22, 2021 Cuts look a bit different on that actually, the blank you can use is HD WMS6 and cut yourself Link to comment Share on other sites More sharing options...
paschal57 Posted June 22, 2021 Author Report Share Posted June 22, 2021 10mm to short and wrong cut Link to comment Share on other sites More sharing options...
Count Muppet Posted June 22, 2021 Report Share Posted June 22, 2021 People have been searching for this key on this forum since at least 2012. I suspect any spare stock of these are long gone Mike at Vauxhall 1 Link to comment Share on other sites More sharing options...
kobblers Posted June 22, 2021 Report Share Posted June 22, 2021 Dav Burg usually have stock of the blank to cut your own. WMS6, I believe. For some reason, I can't get on there site to check...... Rick. Link to comment Share on other sites More sharing options...
grahamparker Posted June 22, 2021 Report Share Posted June 22, 2021 4 minutes ago, kobblers said: Dav Burg usually have stock of the blank to cut your own. WMS6, I believe. For some reason, I can't get on there site to check...... Rick. Not long enough Rick, as Count mentioned the key is for a tilt and turn handle and they have always been hard to obtain. Last ones i had was about 15 years ago never been able to get any since. Link to comment Share on other sites More sharing options...
kobblers Posted June 22, 2021 Report Share Posted June 22, 2021 How long should they be? Rick. Link to comment Share on other sites More sharing options...
grahamparker Posted June 22, 2021 Report Share Posted June 22, 2021 Never measured one to be honest at a guess about 10/15mm longer than the WMS6 Link to comment Share on other sites More sharing options...
Count Muppet Posted June 22, 2021 Report Share Posted June 22, 2021 They’re unusually long when you see them in real life Link to comment Share on other sites More sharing options...
AccessLeeds Posted June 23, 2021 Report Share Posted June 23, 2021 23 hours ago, kobblers said: Dav Burg usually have stock of the blank to cut your own. WMS6, I believe. For some reason, I can't get on there site to check...... Rick. Are you getting the 503 error message? I haven't been able to get on the Davenports site for months on my laptop, tried clearing cookies but no joy. Can access through my phone though oddly enough, but it is a pain when trying to compare prices etc kobblers 1 Link to comment Share on other sites More sharing options...
grahamparker Posted June 23, 2021 Report Share Posted June 23, 2021 Davenports site works ok for me but it is so Slooooooowwwww. Have you tried using a different web browser to access ?. I use Firefox and always keep it updated. Link to comment Share on other sites More sharing options...
Mike at Vauxhall Posted June 23, 2021 Report Share Posted June 23, 2021 (edited) I think the last time this was on the forum, Grahamparker referred to it as "rare as rocking horse shit." That's what I've got written in my notes. Mike. Edited June 23, 2021 by cowers lane 583 Not unicorn grahamparker 1 Link to comment Share on other sites More sharing options...
elfman Posted June 23, 2021 Report Share Posted June 23, 2021 north west keys do 3 wms precut wms keys kb 102 ,104 ,106 looks like its the 106 Link to comment Share on other sites More sharing options...
grahamparker Posted June 23, 2021 Report Share Posted June 23, 2021 4 minutes ago, elfman said: north west keys do 3 wms precut wms keys kb 102 ,104 ,106 looks like its the 106 Nope not long enough. Look at the distance from shoulder to the very first cut. Link to comment Share on other sites More sharing options...
kobblers Posted June 23, 2021 Report Share Posted June 23, 2021 4 hours ago, AccessLeeds said: Are you getting the 503 error message? I haven't been able to get on the Davenports site for months on my laptop, tried clearing cookies but no joy. Can access through my phone though oddly enough, but it is a pain when trying to compare prices etc Yeah. It's been doing it for a while. Rick. Link to comment Share on other sites More sharing options...
MBrown Posted June 23, 2021 Report Share Posted June 23, 2021 https://www.freecodecamp.org/news/http-error-503-service-unavailable-explained-what-the-503-error-code-means/ There's a few ways in this article to resolve the 503 error, hope this can help you get on the site Link to comment Share on other sites More sharing options...
robertgsoliz Posted July 17, 2021 Report Share Posted July 17, 2021 The WMS espag handle has had 3 slightly different keys over the years. Depending on your handle any of the WMS long keys could fit OR you may need the exact match. As we come across this problem a lot we are offering all three in a pack If any of the keys are successful you can return the other two keys and we will exchange them for a further two of the functioning key, return postage will be paid by you. If you are unsure which window handle you have or which key you need then just send us a photo of your window handle and we will try to identify the correct key. Link to comment Share on other sites More sharing options...
grahamparker Posted July 17, 2021 Report Share Posted July 17, 2021 1 hour ago, robertgsoliz said: The WMS espag handle has had 3 slightly different keys over the years. Depending on your handle any of the WMS long keys could fit OR you may need the exact match. As we come across this problem a lot we are offering all three in a pack If any of the keys are successful you can return the other two keys and we will exchange them for a further two of the functioning key, return postage will be paid by you. If you are unsure which window handle you have or which key you need then just send us a photo of your window handle and we will try to identify the correct key. The original request will not match any of the 3 you have. They will not be long enough. The key at the top is for the Tilt and Turn (aka tilt before turn) handle. Link to comment Share on other sites More sharing options...
ponsaloti Posted July 19, 2021 Report Share Posted July 19, 2021 Using my verynear Shoulder to tip = 23mm Shoulder to 1st cut = 9.5mm Link to comment Share on other sites More sharing options...
exp121260 Posted July 19, 2021 Report Share Posted July 19, 2021 I have been looking for this key for few years now but unable to obtain it anywhere. I have looked all 3 keys mentioned above and all are too short. Link to comment Share on other sites More sharing options...
Technical Tony Davenport Posted July 20, 2021 Report Share Posted July 20, 2021 any good .... this looks now to be a special order - a week or so ETA .... different to this one Business Development Manager Direct Tel: 07572 216446 Email: twilkin@davenport-burgess.com DAVENPORT BURGESS, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL t: 01902 366448 f: 01902 602472 e: sales@davenport-burgess.com w: www.davenport-burgess.com FOLLOW US ON SOCIAL MEDIA: Facebook | Twitter exp121260 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now