Simes Posted March 24, 2021 Report Share Posted March 24, 2021 Embarassingly having a problem with this key. It is an Isuzu NQR 2002. Below is the pic of the key and accompanying key number. I have tried to cut on a JMA GM-1P and it didn't work. Just tried again with the following results. However, I think I might have the wrong blank? On instacode it indicates a completely different blank and although the bitting dimensions are identical it is a series beginning with E. Bit puzzled. Can anyone advise on a correct blank if it looks wrong? Link to comment Share on other sites More sharing options...
Count Muppet Posted March 24, 2021 Report Share Posted March 24, 2021 Key looks good. Maybe it’s a bit fresh for the worn lock? Link to comment Share on other sites More sharing options...
David C Posted March 24, 2021 Report Share Posted March 24, 2021 Have you checked it with calipers? It might be my eyes but the 4 cut looks too deep. Link to comment Share on other sites More sharing options...
grahamparker Posted March 24, 2021 Report Share Posted March 24, 2021 Link to comment Share on other sites More sharing options...
grahamparker Posted March 24, 2021 Report Share Posted March 24, 2021 GM15 Link to comment Share on other sites More sharing options...
Simes Posted March 24, 2021 Author Report Share Posted March 24, 2021 So the original key does not match GM15 so maybe the groove is obsolete? As you can see the original key doesn’t have the GM15 profile. Link to comment Share on other sites More sharing options...
Simes Posted March 24, 2021 Author Report Share Posted March 24, 2021 Link to comment Share on other sites More sharing options...
grahamparker Posted March 24, 2021 Report Share Posted March 24, 2021 Done quite a few of these on GM15 always worked. Link to comment Share on other sites More sharing options...
Count Muppet Posted March 24, 2021 Report Share Posted March 24, 2021 The groove being present on the key is unlikely to stop it from working. It’s actually more likely to line up more accurately for cutting. Link to comment Share on other sites More sharing options...
Simes Posted March 24, 2021 Author Report Share Posted March 24, 2021 Thanks all Link to comment Share on other sites More sharing options...
Auto Key Wizard Posted March 24, 2021 Report Share Posted March 24, 2021 MIT15AP for correct match Link to comment Share on other sites More sharing options...
Simes Posted March 24, 2021 Author Report Share Posted March 24, 2021 2 minutes ago, Auto Key Wizard said: MIT15AP for correct match Thanks. I would see why the key code starting E doesn’t match the code attached to the key ring starting N, although they cut the same Link to comment Share on other sites More sharing options...
HowardK Posted March 24, 2021 Report Share Posted March 24, 2021 Silca ISU3 / ISUP3 JMA ISU-2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now