cobbleit Posted January 18, 2017 Report Share Posted January 18, 2017 We get a lot of people asking if we can copy the paxton fobs. Blue and green ringed mainly. Is there a machine that will copy these. They are recognised by the Zed Full to copy to a TX3/4 chip but finalising the copy is an issue. Any ideas. Cheers. Link to comment Share on other sites More sharing options...
grahamparker Posted January 18, 2017 Report Share Posted January 18, 2017 Have you checked to see if the smartcard deluxe will copy Paxton Easyprox fobs ?. Link to comment Share on other sites More sharing options...
cobbleit Posted January 18, 2017 Author Report Share Posted January 18, 2017 Hi Graham. We have tried on the deluxe up and downgrading firmware with no luck. I have heard that the TRS 5000 will do the job but can not be sure. Any thoughts? Link to comment Share on other sites More sharing options...
Growster Posted January 18, 2017 Report Share Posted January 18, 2017 The Smartcard does not do Paxton. I have heard, indeed, that a good car locksmith can do them, but one needs access to the reader. Link to comment Share on other sites More sharing options...
Rocks Locks Posted January 19, 2017 Report Share Posted January 19, 2017 Why would we want to duplicate a Paxton access control fob or any other for that matter it's like duplicating a security profile key without the permission of the licence holder Link to comment Share on other sites More sharing options...
Count Muppet Posted January 19, 2017 Report Share Posted January 19, 2017 I agree. The Paxton ones aren't just your basic fobs. They are often used in more sensitive areas. It's a good thing that they aren't just a quick clone. Link to comment Share on other sites More sharing options...
Growster Posted January 22, 2017 Report Share Posted January 22, 2017 The Smartcard doesn't clone my London Oystercard either. Now, that must be bad thing. Link to comment Share on other sites More sharing options...
Onisan2000 Posted February 10, 2017 Report Share Posted February 10, 2017 The Smartcard Deluxe won't recognise a Paxton fob as unlike the temic, EM and T55xx fobs you have coming in the Paxton Bullet fobs are Hitag2 and require two passwords to read them. The Silca RW4 plus, with Sniffer can copy the fob to it's GTI chip but you need to use the sniffer at the reader when presenting the original fob. you would have to do this with any Car machine so can only do it with a machine that utilises a sniffer. Hitag2 is ID46 Link to comment Share on other sites More sharing options...
Technical Tony D-Burgess Posted February 15, 2017 Report Share Posted February 15, 2017 On 1/18/2017 at 12:04 PM, cobbleit said: We get a lot of people asking if we can copy the paxton fobs. Blue and green ringed mainly. Is there a machine that will copy these. They are recognised by the Zed Full to copy to a TX3/4 chip but finalising the copy is an issue. Any ideas. Cheers. Yes Zedfull - Zedbull - machines WILL Copy these .. the same way as you would a car (They use the same systems) Send the customer away with the chip to "" SNIFF "" the data and come back another day and there you go a copy . Not just car machines lol sorry for delay - Please email me Direct on beloe details for any and ALL Help . thanks Tony I have now moved over to Davenport , but can still supply loads of Car items House Items InstaCode Etc. Kind Regards Tony Wilkin Business Development Manager Direct Tel: 07572 216446 Email: twilkin@davenport-burgess.com DAVENPORT BURGESS, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL t: 01902 366448 f: 01902 602472 e: sales@davenport-burgess.com w: www.davenport-burgess.com FOLLOW US ON SOCIAL MEDIA: Facebook | Twitter kobblers 1 Link to comment Share on other sites More sharing options...
Gerry Posted October 27, 2017 Report Share Posted October 27, 2017 Hi, everyone we have a Paxton Net2 system at our community club. I was wanting to get cheap fobs/cards from China and use with the system. I have a Chinese icopy machine and a few blank cards I have been testing. When I present the card to the Net2 reader attached to the computer add new user window pops up as normal. I add the user but when I present the Chinese fobs or cards to the door reader nothing happens. I can also amend an existing users fob number to a card or fob from china (using the icopy machine) and when presented to the fob net2 reader at the computer that user's details windows opens in the net2 software. What am I missing? Why will the door readers not recognise the card or fob from China yet the reader at the computer will? Thank you. Link to comment Share on other sites More sharing options...
kobblers Posted October 27, 2017 Report Share Posted October 27, 2017 Cheap, Chinese crap that probably has no technical back up or support is probably the best answer. Rick. Link to comment Share on other sites More sharing options...
Gerry Posted October 27, 2017 Report Share Posted October 27, 2017 I thought most if not all this kind of stuff was made in China now. I was also beginning to think maybe the Paxton system (card/fob) has a unique identifier of some sort when presented to the door reader. All guesswork though a quick Google brought me here. Hoping someone with experience on these things could advise me of something I've missed or could try. Link to comment Share on other sites More sharing options...
Count Muppet Posted October 27, 2017 Report Share Posted October 27, 2017 Chinese stuff is probably fixed code. Paxton will be rolling Link to comment Share on other sites More sharing options...
Gerry Posted October 28, 2017 Report Share Posted October 28, 2017 Chinese stuff is probably fixed code. Paxton will be rolling OK, thank you. Can anyone advise if it would be possible to to copy the fob to a card using Zedbull machine. At present we have a paper member card issued every year, a loyalty card and a fob for entry. It was my intention to have three cards in one. I have been successful getting the loyalty card copied to a blank card. Ideally we would be sourcing blank pvc inkjet printable cards from China with mag stripe and access RFID chip. But I have not had success with the RFID Paxton side of things. What hardware software would I need to achieve this. Thank you. Link to comment Share on other sites More sharing options...
lock&quay Posted November 2, 2017 Report Share Posted November 2, 2017 The Smartcard Deluxe won't recognise a Paxton fob as unlike the temic, EM and T55xx fobs you have coming in the Paxton Bullet fobs are Hitag2 and require two passwords to read them. The Silca RW4 plus, with Sniffer can copy the fob to it's GTI chip but you need to use the sniffer at the reader when presenting the original fob. you would have to do this with any Car machine so can only do it with a machine that utilises a sniffer. Hitag2 is ID46 I tried this on the entry system where I live but I could't get it to work ? But I will try again ...RW4 reads the green fob as ID46 . Link to comment Share on other sites More sharing options...
Onisan2000 Posted November 6, 2017 Report Share Posted November 6, 2017 lock&quayIt could be that the fob is not a Paxton Bullet fob but a PAC GDX fob which you can't get to work. This is because PAC GDX uses the same fob with the same passwords but it also utilises the serial number which you can't copy. If you have copied one using the sniffer and are happy to send it to me I can tell you if it's 1: been copied correctly 2: is Paxton or PAC GDX All the best Gary lock&quay 1 Link to comment Share on other sites More sharing options...
heliflyer61 Posted September 7, 2018 Report Share Posted September 7, 2018 Or you could just buy them from Paxton Link to comment Share on other sites More sharing options...
Onisan2000 Posted September 8, 2018 Report Share Posted September 8, 2018 They need to be registered on the access control system, so unless you are the managing agent you won’t be able to register the new fobs and they will not be recognised. Each fob has a unique 8 digit code. lock&quay and grahamparker 2 Link to comment Share on other sites More sharing options...
lock&quay Posted September 9, 2018 Report Share Posted September 9, 2018 The company that fits these only charges £9 per fob down my way . Link to comment Share on other sites More sharing options...
Onisan2000 Posted September 9, 2018 Report Share Posted September 9, 2018 what about lost fobs, call out fees to remove a lost fob and enroll a new fob on the system? most companies on average charge around £35 for the Paxton to give a tenant a new fob. here in Canary Wharf I’ve had much much higher for a fob.. i guess it’s not worth it for you where you are if you’d need to sell so many to just break even. lock&quay 1 Link to comment Share on other sites More sharing options...
a1shoecare Posted September 9, 2018 Report Share Posted September 9, 2018 Where in Canary Wharf are you James Shoe care ? Link to comment Share on other sites More sharing options...
Onisan2000 Posted September 11, 2018 Report Share Posted September 11, 2018 I work in The wharf for one of the Financial institutions. This is just a side line for me but I may go full time at some point. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now