Simes Posted February 27, 2015 Report Share Posted February 27, 2015 I tried to search for this by code and came up with JMA LF-37D but it doesn't look right. Any ideas? I have 43 of them to cut to code. Link to comment Share on other sites More sharing options...
grahamparker Posted February 27, 2015 Report Share Posted February 27, 2015 That's what i get as well, Silca LF58R but the cuts don't match the key if the number is AA689. Link to comment Share on other sites More sharing options...
Gray Posted February 27, 2015 Report Share Posted February 27, 2015 Looks like EU5R Link to comment Share on other sites More sharing options...
Simes Posted February 27, 2015 Author Report Share Posted February 27, 2015 Could be AA589 but either way it doesn't come up as a valid code for that blank on Futura Link to comment Share on other sites More sharing options...
Lock Stock Posted February 27, 2015 Report Share Posted February 27, 2015 I would use the LF-33D/EU16R blank, card 721 & cut what you have there, ignor the code. Its not a great picture but looks like 233332. Someone could of repined the lock to a combo that's not used to stop people cutting keys to code. Link to comment Share on other sites More sharing options...
hibsjo(SCO) Posted February 27, 2015 Report Share Posted February 27, 2015 what did it decode as? carry on! Link to comment Share on other sites More sharing options...
Simes Posted February 28, 2015 Author Report Share Posted February 28, 2015 I would use the LF-33D/EU16R blank, card 721 & cut what you have there, ignor the code. Its not a great picture but looks like 233332. Someone could of repined the lock to a combo that's not used to stop people cutting keys to code. Thanks, but I need to cut a whole load of different codes for the same lock type. I don't need a copy of the one in the picture. Link to comment Share on other sites More sharing options...
grahamparker Posted February 28, 2015 Report Share Posted February 28, 2015 Just try a few random ones (2 or 3) and get your customer to try them before cutting them all. Mike at Vauxhall 1 Link to comment Share on other sites More sharing options...
Simes Posted February 28, 2015 Author Report Share Posted February 28, 2015 Just try a few random ones (2 or 3) and get your customer to try them before cutting them all. Yeah might need to do that Link to comment Share on other sites More sharing options...
Mike at Vauxhall Posted February 28, 2015 Report Share Posted February 28, 2015 I'm going to certainly order a couple of each blank mentioned, I've had this key presented a few times. Link to comment Share on other sites More sharing options...
Mick Friend Posted March 1, 2015 Report Share Posted March 1, 2015 you could call morelands in eastbourne and check the code or Keys unlimited in the wirrall again check the code sequence Link to comment Share on other sites More sharing options...
Simes Posted March 4, 2015 Author Report Share Posted March 4, 2015 Good news is that JMA LF-37D works fine on card 721 Next problem is the Touch keys I have to be cut on Silca TOU2R don't give a bitting for the 3 digit code. Apparently these are direct cut but there are 5 cuts not 3?? Thought this was going to be easy! lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now