Jump to content
Shoe Repairer Forum

Auto Key Wizard

Trade group users
  • Posts

    3,547
  • Joined

  • Last visited

  • Days Won

    194

Everything posted by Auto Key Wizard

  1. Well I've been sharpening steel forepart cutters since the 80's on the WHB 700 using the attachment supplied. Still have four fingers & a thumb on each hand.
  2. =D> =D> =D> =D> Sounds like Glenway....Marshall Coppin adopt this practice too \:D/
  3. Does 1 stud represents each of the original infantry battalions ???
  4. Keith must has thought you said WHB200
  5. Take a look at the image, I've even flipped it 90 degrees for ya. (Just like women & map reading)
  6. We are not discussing the opening of a vehicle, but removal of the ignition from an already unlocked one, But i see your logic.
  7. Why do they bring ignition barrels in Rick? Total key loss? If they're non-transponder systems you could mail them to someone like me, & have a key made to it
  8. The IS200 will be suitable for this... I'm in Malvern, Worcestershire, You can have access to it if you want.
  9. The best way is to place some Blutack by the hole in the reader, & push chip vertically into that. I do this when preparing transponders with logic.
  10. VW Ignition Lock Removal Call top of key way 12 O'clock. At 11 O'clock mark a line along the ignition housing. (from cast lip on front of housing heading back towards steering column). Measure 12mm back along this line from the cast lip on ignition housing. Punch/drill hole at this position to find retaining spring. Push spring down to release lock. Should find code on side of barrel.
  11. That is the latest version Lee No lee the latest version is 30.0 i checked my old rw2 Must of missed the post...Ok I need version 3.00 too it seems Email address PM'd to you D-Power
  12. The 087 is obsolete, yes a modified WL34 will work as I've done it that way too \:D/
  13. and Keith thought there was one rule for him & another rule for everyone else \:D/
  14. Com'on Rick, What have you learnt? ....there's no reason to be embarrassed, you're amongst friends here.
  15. .........has a carrier bag lining How to use adhesive
  16. So this is an Audi A4 Manufactured between 1/9/00 to 28/2/01 The key is Silca HU66AT6 & uses transponder T6 I.D 48 Crypto, this cannot be cloned. Looking at the Application List VAG isn't supported What made you think it was a Fixed Code transponder Minit?
  17. Well that would be the wrong way to attach leather soles!! Adhesive should be applied to the welt & waist on the shoe only, & to the outer area of the sole, leaving the middle area clear, This allows the sole to breath & saves on adhesive too. \:D/ Carrier bags my arse
  18. Is the rubber heel branded with the Church's name?
×
×
  • Create New...