KEY ID x2

[gav]

Any ideas for a blank to use on these two keys ?

This one has is a TRI/MARK and has a letter T on

 

 

 

This one also a TRI/MARK with KS200 on .

Cheers Gav

[Gray]

Gav, look here http://www.mysecuritypro.com/trimark.aspx sorry didn't have time to go through them all. Ilco numbers you can cross ref

[hibsjo(SCO)]

instacode doesnt show much for this key

only shows a national d8778 as a key blank

carry on!

[Craig Gardner]

Any ideas for a blank to use on these two keys ? [attachment=3]a.jpg[/attachment][attachment=2]b.jpg[/attachment]

This one has is a TRI/MARK and has a letter T on

 

 

 

[attachment=0]d.jpg[/attachment][attachment=1]c.jpg[/attachment]

This one also a TRI/MARK with KS200 on .

Cheers Gav

 

 

pass i would just run it through the easy entrie machine if your stuck send me the keys and i will make you the blanks

 

Craig

[discodave]

you could try and use a similar blank and then use your laser machine to mill out the rest of the profile.

[D-Power]

For the second one "KS200" is not a code, it's the Original Trimark reference, this key is available from Ilco: Rèf. TM4 / 1604 ILCO, code series is TM001-050 and TM201-TM250.

 

For the 1st one, I no have idea...

[slippy]

Isn't that a chicago key? Silca ch14

[k4mrc]

i would try to use the car key fs (or reverse as i am away from shop) - for the 1st one.

if you find it a bit wider thin it slightly with your naumkeg. usually works.