An326 Posted November 15, 2009 Report Share Posted November 15, 2009 Good afternoon. Such here a question. Where to take last versions of a disk with program Silca key Programs for RW4? Why Silca does not wish to make updating of base for the given program through the program Silca Remote Service? It turns out that it is necessary to search for last version somewhere at people who have bought the new device. And on the Internet it is impossible to find it. For example it has turned out to find a disk in the beginning of this year with version 13.1.2.33. Yesterday has received a disk with version 14.2.34. Can at whom there is a new version? It is ready to share if to whom it is necessary. Link to comment Share on other sites More sharing options...
kobblers Posted November 15, 2009 Report Share Posted November 15, 2009 That is hard to undertsand buddy. I understood the first paragraph but that was it. Do you have any good English speaking friends who could help you to post? Rick. Link to comment Share on other sites More sharing options...
An326 Posted November 16, 2009 Author Report Share Posted November 16, 2009 That is hard to undertsand buddy. I understood the first paragraph but that was it. Do you have any good English speaking friends who could help you to post? Rick. Excuse, I know English not too well. Also I ask to answer my question. Link to comment Share on other sites More sharing options...
grahamparker Posted November 16, 2009 Report Share Posted November 16, 2009 Are you sure it is an RW4 as mine is currently at version 1.00.044.I have an RW3 with a RW4 circuit board upgrade which i collected from silca during a factory tour in 2008 and it has never been lower than version 1.00.22, no where near the numbers that you are using. Link to comment Share on other sites More sharing options...
An326 Posted November 16, 2009 Author Report Share Posted November 16, 2009 Are you sure it is an RW4 as mine is currently at version 1.00.044.I have an RW3 with a RW4 circuit board upgrade which i collectedfrom silca during a factory tour in 2008 and it has never been lower than version 1.00.22, no where near the numbers that you are using. I have written a question not about firmware the device (and it last 1.00.44), and about the program which goes to it, namely Silca Key Programs (at me it now 14.0.2.34, database version 10.00, upgrade enabled 1/2009). Can at someone there is a new version? On site Silca it is written to versions 14.1. ХХХ, and upgrade enabled 2/2009. Link to comment Share on other sites More sharing options...
D-Power Posted November 16, 2009 Report Share Posted November 16, 2009 The latest SKP version is 14.1.11.35 and it was released on October 27 2009 SKP updates was not supported by SRS for two reasons: 1. because of the large size of databases, and large size of all new pictures etc... 2. to ensure the integrity of personal data stored (hook position, cutted keys, personal codes series, personal code cards etc...) Link to comment Share on other sites More sharing options...
An326 Posted November 16, 2009 Author Report Share Posted November 16, 2009 The latest SKP version is 14.1.11.35 and it was released on October 27 2009 SKP updates was not supported by SRS for two reasons: 1. because of the large size of databases, and large size of all new pictures etc... 2. to ensure the integrity of personal data stored (hook position, cutted keys, personal codes series, personal code cards etc...) If you have such version, make an image of a disk in Nero, and lay out on any file exchange server: Letittbit, Deposit... As the image to turn out big it is possible to break archive into archives on 150 Mb. There is at you such possibility? Otherwise the new version simply not to receive. Link to comment Share on other sites More sharing options...
D-Power Posted November 16, 2009 Report Share Posted November 16, 2009 it's not possible to use any kind of CD, you need to have a CD with the right license number(the same license numbre of your hardware protection), for example, if my hardware protection license number is 12456 I have to use installation CD with license number 12456. so it's not possible to share CD... Link to comment Share on other sites More sharing options...
An326 Posted November 16, 2009 Author Report Share Posted November 16, 2009 it's not possible to use any kind of CD, you need to have a CD with the right license number(the same license numbre of your hardware protection), for example, if my hardware protection license number is 12456 I have to use installation CD with license number 12456. so it's not possible to share CD... My Litsense number [FREE]. And I regularly spread the given version on one Russian forum. In Russia this disk in general wish to sell separately from RW4, for 700 euros. Link to comment Share on other sites More sharing options...
keithm Posted November 16, 2009 Report Share Posted November 16, 2009 Maybe that's why the software is as expensive as it is, because too many people are sharing it. If everyone paid, I'm sure the cost will come down, that's assuming that you are 'illegally' sharing the software. Link to comment Share on other sites More sharing options...
grahamparker Posted November 16, 2009 Report Share Posted November 16, 2009 Oh now it makes sense you want a free copy of software we in the uk have purchased.LOL Link to comment Share on other sites More sharing options...
keithm Posted November 16, 2009 Report Share Posted November 16, 2009 Just a guess you understand Graham Link to comment Share on other sites More sharing options...
An326 Posted November 16, 2009 Author Report Share Posted November 16, 2009 Maybe that's why the software is as expensive as it is, because too many people are sharing it. If everyone paid, I'm sure the cost will come down, that's assuming that you are 'illegally' sharing the software. I can, something I do not understand. But the given disk goes with the device, free of charge. Also agree that turns out to receive the new version of the program, it is necessary to buy each time the new device. So it turns out. Same it is ridiculous. And why then itself Silca does not send to the representatives a new disk with the new version. And to come to get it is underground literally. After all technical support should be? The latest SKP version is 14.1.11.35 and it was released on October 27 2009. Here where to me to take this version? Will advise to buy the new device? Why then to the manufacturer simply not to spread the new version on the site. It highly specialised. Link to comment Share on other sites More sharing options...
D-Power Posted November 16, 2009 Report Share Posted November 16, 2009 My Litsense number [FREE]. And I regularly spread the given version on one Russian forum. In Russia this disk in general wish to sell separately from RW4, for 700 euros. there is some versions of SKP program: 1. A true SKP with all functions (for this is need harware protection with specific serial #) 2. A SKP that isn't a true SKP, it's name is STP free for windows that contains only transponder info and functionalities for transponder machines, but not key cutting card and series (for this no hardware protections is needed) 3. A SKP that isn't a true SKP, it's name is KeyReader free for windows that contains only functionalities for optica machine, but not key cutting card and series (for this no hardware protections is needed) so to what version are asking you? Link to comment Share on other sites More sharing options...
An326 Posted November 16, 2009 Author Report Share Posted November 16, 2009 My Litsense number [FREE]. And I regularly spread the given version on one Russian forum. In Russia this disk in general wish to sell separately from RW4, for 700 euros. there is some versions of SKP program: 1. A true SKP with all functions (for this is need harware protection with specific serial #) 2. A SKP that isn't a true SKP, it's name is STP free for windows that contains only transponder info and functionalities for transponder machines, but not key cutting card and series (for this no hardware protections is needed) 3. A SKP that isn't a true SKP, it's name is KeyReader free for windows that contains only functionalities for optica machine, but not key cutting card and series (for this no hardware protections is needed) so to what version are asking you? At me this variant. And consequently the disk copy is simply necessary to me. I work with this program, only with transponders. [*]2. A SKP that isn't a true SKP, it's name is STP free for windows that contains only transponder info and functionalities for transponder machines, but not key cutting card and series (for this no hardware protections is needed) Link to comment Share on other sites More sharing options...
darren_glasgow Posted November 16, 2009 Report Share Posted November 16, 2009 W-O-W!....and here was me thinking far-eastern instructions were difficult to decipher! Link to comment Share on other sites More sharing options...
D-Power Posted November 19, 2009 Report Share Posted November 19, 2009 I've spoke with some marketing people here in Silca, the solution to have the CD updates of STP FREE (and Keyreader FREE), is to buy an hardware protection (I don't know the price, but for sure is much less than 700 euro). In this way for every update of STP you will receive for free a new CD (generally there's 3 updates of STP per year). Contact the official Silca's distributor of your area for more details and prices. [Personal opinion] I' don't know who is the seller that sells the STP free CD for 700 euros, for sure isn't honest... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now