Westfalia tow bar key code.

[cobbleit]

Looking for the cuts for a Westfalia tow bar lock. Number on lock is 34622.

Believed to be a Dom key. 

No references on instacode

Any ideas??

Edited December 10, 2018 by cobbleit
Spelling

[kobblers]

Is there one digit too many, there, as Instacode only shows Westfalia keys with less than 5 digits?

Rick.

 

 

[cobbleit]

Your right.

That is the code that is on the lock.

Could not find it on instacode.

[cobbleit]

[keySolutions]

Probably a DM8 / DM63.
I don't think the Instacode or Silca Software has these codes.
I would use wafer reading to cut a key for these.

[wycka699]

Hi i have lost key for Westfalia tow bar lock with number 187. Wath code for key.

[x minit uk]

On 4/23/2019 at 2:50 PM, wycka699 said:

Hi i have lost key for Westfalia tow bar lock with number 187. Wath code for key.

Thanks for that.

[ivica]

Hy, I've lost my westfalia's keys, lock number is 36144. Can you give cutting code, so I can cut new key? Thanks a lot.

 

[marco]

 

Hello, I've lost my westfalia's keys, lock number is 31333. (2W33) Silca  Key DM8 Can you give cutting code, so I can cut new key? Thanks in advance

 

[grahamparker]

25335

[Safecracker]

I have found a couple of discrepancies with the 2W01-2W99 series codes.

Instacode 2W33 = 15335 and a slightly different card to Silca 228.

Silca 2W33 = 25335 on card 228

When I have done some checking Silca never use a 1 depth instead use 2,3 & 5 and Instacode uses 1,3 & 5. 

For about three years now when cutting these I have used Instacode for cuts on Silca Card 228 and haven't had any problems with the keys working. Although I would be interested in any comments anyone may have on this. 

Also what would be good is some codes above 2W50 to see if they just duplicated the first 50 as we are getting customers asking for these numbers.