Honda Civic Key

[Danny King]

Hi,

Tryed to cut a lkaser key for a 07 Honda Key on customers blank, Key looks spot on but will not go all the way into lock stops at the same point everytime, Have measured thickness etc and looks spot on

 

Anyone come across this problem or have any idea's

 

Thanks

[grahamparker]

These are a pig to cut even using our triax-e-code there are four different versions of this key.

 

 

Honda (4T-6W) Sub & Main

 

 

There are two systems for cutting these Honda keys, which differ in the way the cut comes off the key at the point nearest the head; see figures below.

 

Honda (4T-6W) Sub & Main (1.05) system

 

 

 

Honda (4T-6W) Sub & Main (1.41) system

 

 

 

The system to be used must be chosen carefully as the two are not compatible.

The easiest way to find the best system to use is to take the measurement marked on the figures with letter "A".

 

(A is the measurement at the top of the key where the cut starts)

 

 

For the (4T-6W) Sub & Main (1.05) system measurement "A" must have a value of approximately 6.85 millimetres (0.270 inches).

For the (4T-6W) Sub & Main (1.41) system measurement "A" must have a value of approximately 6.13 millimetres (0.241 inches).

 

For the Honda (4T-6W) Sub & Main (1.05) system use Serial Numbers 805 and 806.

For the Honda (4T-6W) Sub & Main (1.41) system use Serial Numbers 582 and 619.

 

If you are manually cutting this key then you may need to re-adjust you machine.

[D-Power]

Here the same thing posted by grahamparker but in PDF (on the zip file) and images.

Honda_Note.zip

[Lee]

[Kris Polan]

Check the end of the cave and key.

Regards

Kris