Technical Tony Davenport Posted February 21, 2023 Report Share Posted February 21, 2023 Hope this helps users on their Ninja Machines Brisant / WXM key cutting users may find a problem on their machines with the new genuine WXM mk2 blanks . Using the NEW WXM genuine key section, the Brisant own Ninja jaw works no problem at all NOTE - at present , the problem comes up when using the A02 jaw and adapter . if you use the A02 jaw for cutting New Genuine WXM (mk2) keys they key sitting a little to high in the jaw . the way around this is to adjust (Or make a new card) so the machine cuts 0.2mm deeper than the standard (Old) WXM key . if you try to cut the new WXM keys on the A02 jaw withing this adjustment , the keys will not work . I am sure keyline are looking at this to add / update in the future , but in the meantime, please be aware, Regards Tony Email Tony.Wilkin@jactools.co.uk JAC Tools (Aylesbury Ltd) Unit 5, March Place, Gatehouse Way , Aylesbury, HP19 8UG t: 01296 393935 m: 07985 606103 w: www.jactools.co.uk e: store@jactools.co.uk FOLLOW US ON SOCIAL MEDIA: Facebook david cawthray 1 Link to comment Share on other sites More sharing options...
rob g Posted February 21, 2023 Report Share Posted February 21, 2023 Tony mate,I wasn’t even aware they are available on total?? What’s new on the latest update? Never seen a list of new keys etc Link to comment Share on other sites More sharing options...
Technical Tony Davenport Posted February 28, 2023 Author Report Share Posted February 28, 2023 Hi , yes this is on there but only released " By Brisant " for registered suppliers only . Sadly there is so much added all the time, I do not believe there is an update list available to show . Just I knew about this and it was a customer who helped me with this info after pulling his hair out trying to work the issue out . Regards Tony Email Tony.Wilkin@jactools.co.uk JAC Tools (Aylesbury Ltd) Unit 5, March Place, Gatehouse Way , Aylesbury, HP19 8UG t: 01296 393935 m: 07985 606103 w: www.jactools.co.uk e: store@jactools.co.uk FOLLOW US ON SOCIAL MEDIA: Facebook Link to comment Share on other sites More sharing options...
grahamparker Posted February 28, 2023 Report Share Posted February 28, 2023 The way Brisant are treating suppliers lately they will be the only ones supplying keys soon. They resticted my access to blanks in 2020 then told me a couple of weeks ago I have had to many blanks even at the 2 blank per cylinder ratio they offered me. Cannot argue with Stupid sometimes. How can i have had more than they resticted me to ?. I like many others was warned not to go anywhere near Brisant, wish i had paid more attention. On the plus side we have managed to cut over 10,000 ultion keys since 2015 so done alright out of them. Still cutting plenty but only by duplication now. Technical Tony Davenport 1 Link to comment Share on other sites More sharing options...
rob g Posted February 28, 2023 Report Share Posted February 28, 2023 I think their rules are rather odd.I sell a few of the locks yet I can order 5 blanks per lock? Never needed to.plus am not gonna pay loads to cut there keys to code,just copy them when they come in. saying that,I’d thought by now silca or keyline by now would of made up a card for decoding customers keys? Link to comment Share on other sites More sharing options...
grahamparker Posted February 28, 2023 Report Share Posted February 28, 2023 1 hour ago, rob g said: saying that,I’d thought by now silca or keyline by now would of made up a card for decoding customers keys? They have, We just cannot decode when i get email requests for trade keys and for the public that do not live local. If I have the key then it's straight forward. Link to comment Share on other sites More sharing options...
Peaky Posted March 1, 2023 Report Share Posted March 1, 2023 I guess I should think I'm lucky that the decode site still works for me. Such a shame they act like they do. Link to comment Share on other sites More sharing options...
Technical Tony Davenport Posted March 6, 2023 Author Report Share Posted March 6, 2023 On 2/28/2023 at 8:38 PM, grahamparker said: They have, We just cannot decode when i get email requests for trade keys and for the public that do not live local. If I have the key then it's straight forward. was about to agree also I know Keyline have, but note you still have to be a Brisant dealer to have Brisant allow the cards to be released on the machine to do so . Regards Tony Email Tony.Wilkin@jactools.co.uk JAC Tools (Aylesbury Ltd) Unit 5, March Place, Gatehouse Way , Aylesbury, HP19 8UG t: 01296 393935 m: 07985 606103 w: www.jactools.co.uk e: store@jactools.co.uk FOLLOW US ON SOCIAL MEDIA: Facebook Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now