inside bangle engraving

[k4mrc]

Just looking for an inside bangle engraving machine, over 25mm as at the moment we have a Gravograph Ring cube, which only does to the 25mm

any idea's?

[beware]

25mm sounds like a ring. 

I'd have to check, but you should be able to do proper sized bangles on the ring cube.  You can on the M10J. 

Only problem with bangles is they have to be perfectly circular. 

[k4mrc]

24 minutes ago, beware said:

25mm sounds like a ring. 

I'd have to check, but you should be able to do proper sized bangles on the ring cube.  You can on the M10J. 

Only problem with bangles is they have to be perfectly circular. 

No the ring cube is max 25mm max

looking at the M10

 

[beware]

Looking at the manual, the maximum ring diameter is 25mm.

The maximum bangle diameter is 80mm.

When doing inside bangle, you'd have to select bangle on the touch screen, rather than ring, and then you'd have to change the inside ring attachment diamond for the longer one.

Manual attached.

 

The M10J is just a RingCube without the touchscreen.

RingCube.pdf

[lockdecoders]

Look at the Magic 5S

[Jay]

I have the Gravograph m10 jewel, it’s ideal for rings and bangles. Does the inside and outside of both.