kobblers Posted February 22, 2019 Report Share Posted February 22, 2019 Can anyone provide depth keys and codes for Snap On or National Y1-Y500 series? Cheers. Rick. Link to comment Share on other sites More sharing options...
HowardK Posted February 23, 2019 Report Share Posted February 23, 2019 Only a few Snap-On codes are published Don't know of a Depth Key set, Can make your own depth keys, Spacing in mm, from shoulder = 330, 572, 813, 1054, 1295, 1537 Depths in mm, 1 = 635 2 = 572 3 = 508 root cut in mm = 100 You can scope and read the wafer heights, or gently impression, or disassemble and decode, Please post results so they may be added to the various code programs Link to comment Share on other sites More sharing options...
HowardK Posted February 23, 2019 Report Share Posted February 23, 2019 OOPS MY BAD, I Apologize, Instacode has all the Snap-On codes for that series Link to comment Share on other sites More sharing options...
kobblers Posted February 23, 2019 Author Report Share Posted February 23, 2019 My Instacode Live doesn't show codes for the Y series? Rick. Link to comment Share on other sites More sharing options...
keySolutions Posted February 23, 2019 Report Share Posted February 23, 2019 My ancient version of Instacode (2014) has it as Card 890 ISN 3824 Link to comment Share on other sites More sharing options...
kobblers Posted February 23, 2019 Author Report Share Posted February 23, 2019 Is it possible to print the codes? Cheers. Rick. Link to comment Share on other sites More sharing options...
kobblers Posted February 23, 2019 Author Report Share Posted February 23, 2019 I found the codes using the ISN number so thanks for that. All I need now are depth keys if anyone can help as I know barely anything about creating them from scratch as per HowardK's suggestion. Rick. Link to comment Share on other sites More sharing options...
HowardK Posted February 23, 2019 Report Share Posted February 23, 2019 In Instacode, click on Manufacturer, click on Snap-On, click Do Search, double click on Y1 -Y500, click on Task, click on Print Series to see the list of codes, you could also type in a known code and get the same results generally you need 3 blanks, and a machine to cut by code, stamp a key #1, then plunge cut #1 depths in all 6 spaces, stamp a key #2 then plunge cut #2 depths in all 6 spaces, same for #3 using the #3 depth but you need a code machine to do this in which case you do not need a set of depth keys, unless you are doing this to read wafer heights in a disassembled lock kobblers 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now