Bronco78th Posted October 15, 2015 Report Share Posted October 15, 2015 Morning Folks, Just wondering if there are any Rotation S Specialists still around after Suregrave went belly up? We have 2 Rotation S Machines, One we got recently second hand - which I use for flat stuff, largely due to a lack of space but its only used really when we get busy.....and of course a back-up if the first machine fails. The Primary machine which is used daily, we got second hand about 3 years ago and its only had one check since then. Nothing specific wrong that I haven't been able to fix myself, but an increasing amount of squeaking and such is making me slightly anxious. Especially given the time of year we are about to go into and a 5 fold increase in work load, I don't fancy either machine breaking down on me. Just a piece of mind thing, as im not the most mechanically minded so don't really want to risk stripping parts not knowing what the hell im doing. Thanks in advance for any help/contacts! Regards, John Link to comment Share on other sites More sharing options...
Gray Posted October 15, 2015 Report Share Posted October 15, 2015 Personally I'd chuck them in a skip and start afresh with a Umarq machine. Or Gravo as a second choice. failing that try these http://www.ronamachines.co.uk/ or PM shadowster he's had some problems with the rotation s until he saw the light. shadowster 1 Link to comment Share on other sites More sharing options...
inscriptio Posted October 15, 2015 Report Share Posted October 15, 2015 Have found this guy very good, Colin Archer ex Suregrave engineer also has a vast array of spare parts for Suregrave/Dahlgeren http://caservicing.co.uk/index.html Also Sean ex Suregrave Electrical engineer http://www.essengraving.co.uk/. Sure there are others but these are two I have used. Link to comment Share on other sites More sharing options...
shadowster Posted October 16, 2015 Report Share Posted October 16, 2015 Personally I'd chuck them in a skip and start afresh with a Umarq machine. Or Gravo as a second choice. failing that try these http://www.ronamachines.co.uk/ or PM shadowster he's had some problems with the rotation s until he saw the light. listen to argy . great advise Link to comment Share on other sites More sharing options...
shadowster Posted October 16, 2015 Report Share Posted October 16, 2015 Have found this guy very good, Colin Archer ex Suregrave engineer also has a vast array of spare parts for Suregrave/Dahlgeren http://caservicing.co.uk/index.html Also Sean ex Suregrave Electrical engineer http://www.essengraving.co.uk/. Sure there are others but these are two I have used. ess engraving i have had great dealings with him and pm'd you about the other Link to comment Share on other sites More sharing options...
GK Solutions UK Posted November 4, 2015 Report Share Posted November 4, 2015 Hi, I used to build these machines, as a Suregrave engineer for many years. Unfortunately nobody knows these machines as well as me. Thanks Gary 07950211133 Lee 1 Link to comment Share on other sites More sharing options...
shadowster Posted November 4, 2015 Report Share Posted November 4, 2015 Hi, I used to build these machines, as a Suregrave engineer for many years. Unfortunately nobody knows these machines as well as me. Thanks Gary 07950211133 hi again gary have you any main boards , power boards Link to comment Share on other sites More sharing options...
GK Solutions UK Posted November 8, 2015 Report Share Posted November 8, 2015 Hi, Yes I do. What controller do you have on the machine? There are various controllers of which look very similar. Different controllers use different power boards. What is the problem with your current power board? By all means send me some pictures to : Enquiries@gksolutionsuk.com I can then determine what controller you have. Thanks Gary Link to comment Share on other sites More sharing options...
GK Solutions UK Posted November 8, 2015 Report Share Posted November 8, 2015 Hi, Sorry I did misread. I do also have main boards, handsets etc. but again you would need to confirm the controller. Thanks Gary Link to comment Share on other sites More sharing options...
shadowster Posted November 8, 2015 Report Share Posted November 8, 2015 Hi, Sorry I did misread. I do also have main boards, handsets etc. but again you would need to confirm the controller. Thanks Gary When mine blew up I was told there was none about that's how I scrapped mine. Link to comment Share on other sites More sharing options...
Bronco78th Posted November 28, 2015 Author Report Share Posted November 28, 2015 Cheers for the Help Guys. Work wise im stuck with the Rotation S, no idea why we ended up with the second one, but the purse strings are tight and Im working with someone who has no idea, yet gets to make the final choices...which is how we ended up with 2 Rot S's. Anyway they are doing the job for now and ill bear those contacts in mind. I might be in the market for a machine myself in the not to distant future, getting a tad tired of the run of the mill stuff, want to get back to being creative again.... Cheers John Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now