silca sx9 key decoding

[Craig Gardner]

has anyone decoded a very worn sx9 key on a 399evo with b6 adaptor as instacode says it can do it and silca software says no. it wont read on my machine it says key not inserted proparly although cuts fine in same adaptor when decoded by eye and bitting entered.

 

craig

[grahamparker]

Done hundreds on the unocode 399 without any problems but i don't use instacode so that may be the problem.

 

There has been the odd occasion when we have had a non feasable combination on the unocode but if you

change the cut from normal to either laser or flat this cures that problem, but never with an sx9.

[autolock]

if its too worn to decode by eye,use a caliper to measure each cut depth then you can compare youre measurement with instacode to give you the cut,,hope that makes sense