chrisorros Posted May 13, 2011 Report Share Posted May 13, 2011 I've got a problem with GravoStyle 98. When i go to transfer the info from the computer to the engraving machine its just not transfering. I get a message come up on the computer screen saying "machining in process" but thats it, no data goes to the engraver. Normally this message wouldn't come up on the computer screen. I've checked and tested the leads and there fine. Has anybody had this happen? Or mainly does anyone know how to sort the problem? It's running on a GravoGraph IS200 if that makes any difference. Link to comment Share on other sites More sharing options...
Lee Posted May 13, 2011 Report Share Posted May 13, 2011 what does it say on the engraver screen? Link to comment Share on other sites More sharing options...
gav Posted May 13, 2011 Report Share Posted May 13, 2011 Does the display on is200 say Ready to recieve ? Link to comment Share on other sites More sharing options...
skippy Posted May 13, 2011 Report Share Posted May 13, 2011 Title GRAVOGRAPH UK LTD. Description Engraving machines, laser engraving - software - materials Sent by Lee UNIT 3, TROJAN BUSINESS CENTRE TACHBROOK PARK DRIVE LEAMINGTON SPA WARWKS. CV34 6RH Contact:- MR MICHEL TISSUT Tel:- 01926 884 433 Fax:- 01926 883 879 Email:- info@gravograph.co.uk Web:- http://www.gravograph.co.uk/ Link to comment Share on other sites More sharing options...
ANDY Posted May 13, 2011 Report Share Posted May 13, 2011 i get the machining in progress screen, it pops up very quick thats normal make sure that you have "port" selected and not "test" on the machining screen top left also look at your spooler, are the jobs stuck in there? Link to comment Share on other sites More sharing options...
ANDY Posted May 13, 2011 Report Share Posted May 13, 2011 and turn the machine on Link to comment Share on other sites More sharing options...
Lee Posted May 13, 2011 Report Share Posted May 13, 2011 Occasionally with 98 you have to re-install the machine. Go to the machining tab click set up machines - Right click & delete is200 binary click Add machine, select gravograph is200 binary from list, click add on add screen highlight "Generic/text only" Under the pre-mentioned machining window click the "Port" bullet & it should go! Lee Link to comment Share on other sites More sharing options...
chrisorros Posted May 14, 2011 Author Report Share Posted May 14, 2011 Thank you for the advice. I've tried the lot with no success. Made the port / test mistake before so i've checked that. Tried re-installing the machine as well. That's one i'll remember for fucture proplems, but still no change. The machine does say its ready to recieve & has power running to it lol. The information doesn't go to the spooler? Is that the proplem. Again thank you for the advice. Link to comment Share on other sites More sharing options...
gav Posted May 14, 2011 Report Share Posted May 14, 2011 Have you tried reinstalling the software ? I would try that next Link to comment Share on other sites More sharing options...
chrisorros Posted May 14, 2011 Author Report Share Posted May 14, 2011 We have a winner! Thank you Gav that's seems to be the trick. Link to comment Share on other sites More sharing options...
Lee Posted May 14, 2011 Report Share Posted May 14, 2011 WE HAVE A WINNER Lee Link to comment Share on other sites More sharing options...
petercoulson Posted May 14, 2011 Report Share Posted May 14, 2011 maltesers on the way? Link to comment Share on other sites More sharing options...
ANDY Posted May 14, 2011 Report Share Posted May 14, 2011 praise the lord of engravemonts =D> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now