S-tech dimple/laser programmed to miracle A9

[ciawest]

hi,

I programmed the A9 miracle to decode and cut S-Tech dimple laser keys.

I've only done one so far but it worked.

Thought it might be usual to any1 else that doesn't have a manual machine for these.

The depths for the dimple cuts still has to be corrected but I just let the miracle cut those at what it measures.

I'm quite confident the laser measurements are correct and the positions of the dimples too.

I did have to program it as 2 separate keys as I dont think i can put laser and dimples onto one key.

Anything unclear in the pictures, just ask

[ciawest]

I should have recorded and taken a picture of the first key I did. I'll be sure to do that next time

[lockdecoders]

Well done there. We have had this option since the beginning where you can make your own card if you have all the dimensions etc.

[ciawest]

18 hours ago, lockdecoders said:

Well done there. We have had this option since the beginning where you can make your own card if you have all the dimensions etc.

Thanks,

WIll you be doing an update where, you can choose 2 types of cut on one key? or is that already possible, if so, how?

Also can you select which vice to use for the custom key?

I have an LF-14d key to cut, that wants me to use the car key vice, which the key cant fit into. I'd need to be able to do it in the single sided vice.

[lockdecoders]

email me all this so i can ask the engineers