ABUS

[EST]

Hi,

any suggestions where I find key blank for this ZS21E

 

[Growster]

I reckon this is a dealer profile, allotted to one or more dealers, in way to foster a kind of territorial exclusion. I think one or 2 people here have a list of dealers and their respective profiles.

[grahamparker]

I have a list of the old 5 pin section and dealers but they will not issue this information for current cylinders.

You will need to contact Abus direct in your country to try and track the supplier down.

[Bren]

On 12/29/2023 at 8:36 AM, grahamparker said:

I have a list of the old 5 pin section and dealers but they will not issue this information for current cylinders.

You will need to contact Abus direct in your country to try and track the supplier down.

Is this still the case Graham? Got a similar one in today (Y21CE)

[grahamparker]

13 minutes ago, Bren said:

Is this still the case Graham? Got a similar one in today (Y21CE)

Y21CE is on the curved profile. It will be 6 pin but you will need to go back to the original lock supplier for extra keys.

[Bren]

22 minutes ago, grahamparker said:

Y21CE is on the curved profile. It will be 6 pin but you will need to go back to the original lock supplier for extra keys.

Thanks Graham

 

[ALT]

I see plenty of the ZS21B (ZS= "Zolit" series and 21B is the profile) in Sweden. I carry original Abus blanks (as a dealer) and do not think there are any others. The Zolit series is sold by the big (think B&Q, Wickes ets) builders stores and comes with a security card that needs to be presented for extra copies. Info on card is then transformed (via Abus dealer site) to bitting så the actual key does not have to be present. The Zolit series is not used for master keyed systems.

Lars

[grahamparker]

54 minutes ago, ALT said:

The Zolit series is not used for master keyed systems.

My section is. I have multiple master suites on Zolit and The Curved Y profile.

You can add bearings to side cuts making complex master suites possible.

Most are shared sections to make obtaining stock easier but there are exclusive sections for big users.

[ALT]

I can only tell/know how it is designated in Sweden. The curved profile (used for master suits) is sold under the name Vitess here and I have my own section under it.

Lars

[grahamparker]

4 hours ago, ALT said:

I can only tell/know how it is designated in Sweden. The curved profile (used for master suits) is sold under the name Vitess here and I have my own section under it.

Lars

If you assemble yourself you can do anything you like with any system as long as you have the pins/master wafers and machinery to cut accurately and skills required to assemble. I can plan a basic system for 100 differs myself if required. Anything requiring common or sub suites i let the manufacturers plan the system.