Ian platt Posted February 4, 2023 Report Share Posted February 4, 2023 Hi all anyone know if there’s a cutting card for these blanks on futura thanks in advance Link to comment Share on other sites More sharing options...
Auto Key Wizard Posted February 4, 2023 Report Share Posted February 4, 2023 I think you need to be more specific on which Avocet ABS profile is required ! Master, Master RH MKS or Ultimate Ian platt 1 Link to comment Share on other sites More sharing options...
grahamparker Posted February 5, 2023 Report Share Posted February 5, 2023 Cards were locked on my Triax so might also be on the futura. There is an alternative now for the old ABS WA prefix etc. Ian platt 1 Link to comment Share on other sites More sharing options...
Ian platt Posted February 5, 2023 Author Report Share Posted February 5, 2023 These are the abs keys was wondering if can be cut to code on Silca new update thanks Link to comment Share on other sites More sharing options...
David Horrabin Posted February 5, 2023 Report Share Posted February 5, 2023 Hello Unfortunately if your using a Futura you can’t cut a key if you have a deep outer cut next to the magnet position as the cutter hits the magnet same as cutting the Federal Ian platt 1 Link to comment Share on other sites More sharing options...
rmarsters Posted February 6, 2023 Report Share Posted February 6, 2023 For the WA codes the Silca card is 1282 it's not locked The cuts are the same as Mul T Lock classic/interactive if you have a way of cutting them Ian platt 1 Link to comment Share on other sites More sharing options...
lock&quay Posted February 6, 2023 Report Share Posted February 6, 2023 Is there a card number for the master series ? Link to comment Share on other sites More sharing options...
grahamparker Posted February 6, 2023 Report Share Posted February 6, 2023 4700 for the Triax Pro. Card was locked by default but mine is now unlocked as we stock ABS locks. lock&quay 1 Link to comment Share on other sites More sharing options...
Azaloid Posted February 6, 2023 Report Share Posted February 6, 2023 On the JMA MULTICODE/SUPRACODE all ABS files files are unlocked as requested by AVOCET ABS and can be cut by code. the master series cant be done by code only by inputting the cuts or reading the keys. if you are an ABS centre who has access to the master blanks the files for the side pins are there also. After an update quite a while ago there is no issue with deep cuts next to the magnet either. Link to comment Share on other sites More sharing options...
grahamparker Posted February 6, 2023 Report Share Posted February 6, 2023 37 minutes ago, Azaloid said: On the JMA MULTICODE/SUPRACODE all ABS files files are unlocked as requested by AVOCET ABS and can be cut by code. the master series cant be done by code only by inputting the cuts or reading the keys. if you are an ABS centre who has access to the master blanks the files for the side pins are there also. After an update quite a while ago there is no issue with deep cuts next to the magnet either. Silca Triax and Triax Pro have never had any issues cutting them. We have cut hundreds of them both WA series and MG series. Not happy with them selling blanks as I had to spend around £2k to become and agent. Link to comment Share on other sites More sharing options...
Azaloid Posted February 6, 2023 Report Share Posted February 6, 2023 4 minutes ago, grahamparker said: Silca Triax and Triax Pro have never had any issues cutting them. We have cut hundreds of them both WA series and MG series. Not happy with them selling blanks as I had to spend around £2k to become and agent. No doubt as both of those machines do a great job, i was just pointing out the files were unlocked and the JMA machines don't have the same issue as below. most wholesalers have been selling these blanks for a while but i believe no one can purchase the master blanks other than "agents". 19 hours ago, David Horrabin said: Hello Unfortunately if your using a Futura you can’t cut a key if you have a deep outer cut next to the magnet position as the cutter hits the magnet same as cutting the Federal Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now