Martin b Posted December 8, 2021 Report Share Posted December 8, 2021 Has anyone found a way of successfully cutting and decoding these ?? I have the Milenco/Yale jaw and have cut the longer version no probelems (codes are A B C - D E F ) But i cant seem to work out how to cut the shorter versions with toothed out tip on the A9 ?? (codes are SA,SB,SC- PD,PE,PF) Do i need an extra jaw or is the A9 not capable of cutting these ?? Keys on the right in this pic are the ones im struggling with Thanks Mart ciawest 1 Link to comment Share on other sites More sharing options...
kirkybob Posted December 8, 2021 Report Share Posted December 8, 2021 on the jma multicode there is a spacer fits the jaws to take into account the shorter keys. I would suspect the A9 is the same I am sure an a9 owner will be along shortley to tell you if I am correct Link to comment Share on other sites More sharing options...
Martin b Posted December 8, 2021 Author Report Share Posted December 8, 2021 The shorter toothed blanks don’t go in the jaw far enough plus there appears to be no way of adjusting the software that will allow the key to be cut further back (see pic ) the red line can’t be moved or adjusted ciawest 1 Link to comment Share on other sites More sharing options...
ciawest Posted January 27, 2023 Report Share Posted January 27, 2023 did you find a solution martin? I have the same problem Link to comment Share on other sites More sharing options...
lockdecoders Posted January 30, 2023 Report Share Posted January 30, 2023 the only way at the moment is to cut the head of the original and cut 2 new keys unless you have the code card or can sight read the original key Link to comment Share on other sites More sharing options...
Auto Key Wizard Posted January 30, 2023 Report Share Posted January 30, 2023 I thought the A9 was the Miracle's flagship! Link to comment Share on other sites More sharing options...
lockdecoders Posted January 31, 2023 Report Share Posted January 31, 2023 ?????? It has been the S10 for 3 years now. After we made the jaw they made the key blank shorter so it would need a new expensive jaw. Link to comment Share on other sites More sharing options...
Dave the locksmith Posted January 31, 2023 Report Share Posted January 31, 2023 Buy a silca mchine, cuts and decodes with no problems. Quote Auto Key Wizard and grahamparker 2 Link to comment Share on other sites More sharing options...
grahamparker Posted January 31, 2023 Report Share Posted January 31, 2023 47 minutes ago, Dave the locksmith said: Buy a silca mchine, cuts and decodes with no problems. Agreed. Link to comment Share on other sites More sharing options...
Martin b Posted January 31, 2023 Author Report Share Posted January 31, 2023 On 1/27/2023 at 2:43 PM, ciawest said: did you find a solution martin? I have the same problem Nope as others say buy another machine or adapt the key of the original as lockdecoders suggest ciawest 1 Link to comment Share on other sites More sharing options...
lockdecoders Posted January 31, 2023 Report Share Posted January 31, 2023 We are looking at a building new jaw. Link to comment Share on other sites More sharing options...
ciawest Posted February 2, 2023 Report Share Posted February 2, 2023 On 1/31/2023 at 3:18 PM, lockdecoders said: We are looking at a building new jaw. Is it not possible to make a spacer to fit the original vice? Link to comment Share on other sites More sharing options...
lockdecoders Posted February 2, 2023 Report Share Posted February 2, 2023 it is being looked at lock&quay 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now