exp121260 Posted December 7, 2020 Report Share Posted December 7, 2020 Morning all I have seen this key before but can't remember if blanks are available or not. Customer wants one copy and it seems like a Abloy key with dimple cutts. Can anyone help please Thanks Quote Link to comment Share on other sites More sharing options...
grahamparker Posted December 7, 2020 Report Share Posted December 7, 2020 Never seen the blanks but more importantly i do not think any machine will allow you to clamp the key tight enough without some form of adapter. exp121260 1 Quote Link to comment Share on other sites More sharing options...
EST Posted December 7, 2020 Report Share Posted December 7, 2020 maybe ... Silca MSL1 CB 7898 Errebi MAS1 JMA MASL-1 exp121260 1 Quote Link to comment Share on other sites More sharing options...
EST Posted December 7, 2020 Report Share Posted December 7, 2020 possible this way, without adapters (depends on how worn the dimple machine clamps are) exp121260 1 Quote Link to comment Share on other sites More sharing options...
EST Posted December 7, 2020 Report Share Posted December 7, 2020 or shortening this blank ... exp121260 1 Quote Link to comment Share on other sites More sharing options...
grahamparker Posted December 7, 2020 Report Share Posted December 7, 2020 When i put slight finger pressure on the keys that are originally mentioned it fell out of the magnum jaw straight away, the jaw is not quite deep enough. exp121260 1 Quote Link to comment Share on other sites More sharing options...
rmarsters Posted December 7, 2020 Report Share Posted December 7, 2020 If these are on parking bollards I've cut these on both JMA BDA1 and JMA MASL1 It will need shortening and filing because the blank is a but too wide, somehow I've managed to end up with a spare lock so I can test it out. I do the cut on a Mustang machine. exp121260 1 Quote Link to comment Share on other sites More sharing options...
grahamparker Posted December 7, 2020 Report Share Posted December 7, 2020 The ones we had in fitted caravan wheel clamps. exp121260 1 Quote Link to comment Share on other sites More sharing options...
rmarsters Posted December 7, 2020 Report Share Posted December 7, 2020 exp121260 1 Quote Link to comment Share on other sites More sharing options...
exp121260 Posted December 7, 2020 Author Report Share Posted December 7, 2020 Thanks all for your replies. Customer advised that this key is for a garage door lock. My machine Clamps are in good condition and should hold the key to do the dimple cuts. I will give it a go ( taking above advise into consideration) see if it works as I have been asked if I can do these more than one time by different customers. I believe the locks are cheap Chines locks .. Quote Link to comment Share on other sites More sharing options...
Tdw Posted January 1, 2021 Report Share Posted January 1, 2021 I am desperately looking for a place to buy these key blanks. And also for a place to have some of these keys cut.. but most importantly have the blanks. I feel I can hand make a key with the blank. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.