A1 LOCKSMITHS Posted July 14, 2020 Report Share Posted July 14, 2020 Hi Guys I seem to think i have managed to cut spare additional keys for these before but I dont seen to be able to find the information on my futura can anyone point me to the best way to cut if possible not sure if I need an upgrade or a licence? I know how to cut the four cut laser keys with the three and two sets on dimples but can't find these on the software within the tablet Thanks for your help on this one Steve H Link to comment Share on other sites More sharing options...
Count Muppet Posted July 14, 2020 Report Share Posted July 14, 2020 Look under platinum Link to comment Share on other sites More sharing options...
A1 LOCKSMITHS Posted July 14, 2020 Author Report Share Posted July 14, 2020 I have looked within that section and can only find the following listing not sure which card to use for each set of cuts At a guess card 4180 for the d and e cuts again I gather these are reversed but can't see what to use for the f cuts Any further help would be appriciated Yours Steve H Link to comment Share on other sites More sharing options...
Count Muppet Posted July 14, 2020 Report Share Posted July 14, 2020 2t4w for the f track Link to comment Share on other sites More sharing options...
Count Muppet Posted July 14, 2020 Report Share Posted July 14, 2020 And you’ll be looking for platinum 5+4 for the d & e so 4180 looks good Link to comment Share on other sites More sharing options...
A1 LOCKSMITHS Posted July 14, 2020 Author Report Share Posted July 14, 2020 Many thanks Count I think i have destroid many brain cells while in lock down far to much ale, I had a complete an utter blockage couldn't think how to do them. Firstly I was searching under magnum not platinum that didn't help and then for what ever reason I thought the five cuts were the track cuts, I didn't look at my notes comeplete mind struck. Thank you very much for the direction I needed i was sat looking at the futura"talking to it" I know you can do these but how do you know it didn't answer me? Again many thanks I owe you a favour if ever i can? Do you or any of the guys out there who use the futura know why the software goes back to the home page sometimes after cutting one side of a laser key and sometimes if i leave it say to answer the phone come back to cut the second side and back to the home page. annoying if I have decoded a key I have to decode a second time? Just a question I would like to know the answer too but not urgent. Yours Steve H Link to comment Share on other sites More sharing options...
bob Posted July 14, 2020 Report Share Posted July 14, 2020 mgn1rp on futura Link to comment Share on other sites More sharing options...
bob Posted July 14, 2020 Report Share Posted July 14, 2020 27 minutes ago, A1 LOCKSMITHS said: Many thanks Count I think i have destroid many brain cells while in lock down far to much ale, I had a complete an utter blockage couldn't think how to do them. Firstly I was searching under magnum not platinum that didn't help and then for what ever reason I thought the five cuts were the track cuts, I didn't look at my notes comeplete mind struck. Thank you very much for the direction I needed i was sat looking at the futura"talking to it" I know you can do these but how do you know it didn't answer me? Again many thanks I owe you a favour if ever i can? Do you or any of the guys out there who use the futura know why the software goes back to the home page sometimes after cutting one side of a laser key and sometimes if i leave it say to answer the phone come back to cut the second side and back to the home page. annoying if I have decoded a key I have to decode a second time? Just a question I would like to know the answer too but not urgent. Yours Steve H need extra jaws and data card 3826/3825 for other cuts ,jaws 01r 35j 36j Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now