KABA dimple keys

[BIG AL PRICE]

chaps,

do any of you cut the KABA dimple key blanks?what machines do you use & how much do you charge per key?i may have an ongoing order for many keys so trying to work out if better to buy a machine & if it would be cost effective

cheers,

 Allan

[exp121260]

Any Laser/dimple machine should do them but you need correct cutters. 

Mustang will be my first choice if you already do not have a laser/dimple machine. 

below cutter/tracer from SKS .

Hope that helps.. 

 

[grahamparker]

11 hours ago, BIG AL PRICE said:

chaps,

do any of you cut the KABA dimple key blanks?what machines do you use & how much do you charge per key?i may have an ongoing order for many keys so trying to work out if better to buy a machine & if it would be cost effective

cheers,

 Allan

Which kaba key are we talking about ?.

[Growster]

Graham, Lockstock, us and no doubt others would cut these to code, or more likely, from a decode - whilst remaining affordable.

Including Kaba Micro, Kaba 8, Kaba 20, though perhaps not Kaba 20i.

[BIG AL PRICE]

12 hours ago, grahamparker said:

Which kaba key are we talking about ?.

the KABA KA2 blank from SKS....

[BIG AL PRICE]

8 hours ago, Growster said:

Graham, Lockstock, us and no doubt others would cut these to code, or more likely, from a decode - whilst remaining affordable.

Including Kaba Micro, Kaba 8, Kaba 20, though perhaps not Kaba 20i.

what type of costs would this be please mate?

[Lock Stock]

On 4/7/2020 at 6:59 PM, BIG AL PRICE said:

the KABA KA2 blank from SKS....

You are going to struggle on Kaba 20 as 
they want it to be a Kaba only product. The pins and tips on blanks have been changed to stop people doing keys. You can now only do the older systems. And you won’t get anything more or new from Silca, it’s finished. 

[Cameron Avery]

Had a recent job for Kaba 20, and nobody else could do them. Luckily they were unregistered so we ordered them straight from KABA for the customer. Doors were newly installed shopfront.