Mike at Vauxhall Posted October 4, 2019 Report Share Posted October 4, 2019 I really don't get many enquiries about dimpled keys, but if a buy a basic machine, would I be able to at least some of the eurospec mp10 keys? as I get quite a few enquires about these, and getting hold of the blanks doesn't seem a problem. Mike. Link to comment Share on other sites More sharing options...
Count Muppet Posted October 4, 2019 Report Share Posted October 4, 2019 You can buy the blanks with the dimples already done. im sure they are always in the same place Mike at Vauxhall 1 Link to comment Share on other sites More sharing options...
grahamparker Posted October 4, 2019 Report Share Posted October 4, 2019 3 minutes ago, Count Muppet said: You can buy the blanks with the dimples already done. im sure they are always in the same place Only if they are the standard stocked suite, if you have a shared or special section supplier nearby they are in a different position. Standard section keys usually begin with the BG prefix if my memory serves me correctly. Oh and there is a Zoo version of the MP10 as well and there blanks are cheaper. Cameron Avery and Mike at Vauxhall 2 Link to comment Share on other sites More sharing options...
exp121260 Posted October 4, 2019 Report Share Posted October 4, 2019 1 hour ago, cowers lane 583 said: I really don't get many enquiries about dimpled keys, but if a buy a basic machine, would I be able to at least some of the eurospec mp10 keys? as I get quite a few enquires about these, and getting hold of the blanks doesn't seem a problem. Mike. I did 2 last week on Slica ZO1 blank and both worked perfectly, However the unbranded blank I ordered from DP only worked in the main door but too thick for the apartment door and did not go into the lock. So, I recommend the SILCA ZO1 from CB or NW keys for these keys. I think the dimple cuts of all Eurospec MP10 keys starting with 'BGMK1' or 'BGMK2' followed by numbers only between 00000 to 09999 are the same but if the key starts with BG10 the Dimple cuts are different. You can order some blanks , next time someone wanted one of these , cut one for him/her and cut dimple blanks on some of the spare blanks for future requests. Mike at Vauxhall, Youngcobbler and The Worksop Heel Bar 3 Link to comment Share on other sites More sharing options...
NYKeys Posted September 26, 2022 Report Share Posted September 26, 2022 Anyone know a supplier who has in stock MP10 keys with dimples pre cut? Sure I had some but can't find them now Thanks Link to comment Share on other sites More sharing options...
Azaloid Posted September 26, 2022 Report Share Posted September 26, 2022 ZOO V10 blank in stock JMA KBZH6 https://jma-uk.co.uk/kbzh6-genuine-zoo-hardware-v10-cylinder-key-blank Link to comment Share on other sites More sharing options...
Dave the locksmith Posted September 26, 2022 Report Share Posted September 26, 2022 10 Pin E2 Restricted cylinder Key blank with Side cut [C10Z801NS-5] : Intolocks.com After market blank with all the dimples pre-cut for all variants / suites Link to comment Share on other sites More sharing options...
Michael Posted September 27, 2022 Report Share Posted September 27, 2022 https://www.davenport-burgess.com/search.aspx?s=gc169 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now