EZEBADGE

[kobblers]

has anyone figured out how to use the printer settings yet and what they actually mean? (the A, C and E settings)

 

i've run two separate sheets off and neither line up

[Guest WOODY]

The way I set my printer up to the sheets of stickers, after messing up a full page of 1" centres, I peeled off all the stickers from the sheet then used the empty sheet as a template. Next I adjusted the settings a little and printed a hole page onto a sheet of plane A4 paper then held it over the empty sticker sheet upto the light to see if it was lined up, done this a few times with very slight changes to the settings untill it was a as near as I could get it. At least this way you don,t waist expensive sheets of stickers. only a few sheets of paper.

 

Hope this helps.

[ANDY]

after several attempts i have figured out the equation.

 

A = no chance of lining up

B = fat chance of lining up

C = don't know what i did but it seems to work.

 

there is also a hidden 4th setting under "D" that equals "Doh!"

[Lee]

I peeled off all the stickers from the sheet then used the empty sheet as a template.

 

when setting up mine I peeled the 4 corner stickers of before holding up to the light, saved waisting an entire sheet!

 

the alignment issue is still the sytems achilles heel, but once set the systems excellent.

 

Lee