Jump to content
Shoe Repairer Forum

Recommended Posts

Cut thousands of these silca UAP2's before and never had any issues until this week, had 4 back from separate customers, all cut direct from original key as well. Checked key machines and had no other keys back in last few months, so was wondering if it's a possible faulty batch of keys? Unlikely I know being silca, if not any suggestions? Thanks 

Link to comment
Share on other sites

Don't know if this is of any help but think I've sussed out the issue, it had my head battered so went round the customer house to have a look. Funnily enough the ones that didn't work the UAP barrel had a small eschetion on the front and even though the blanks all went in it was rubbing really tight on the top hence not turning. When looking at the original key closely there's a tiny little notch maybe 0.5mm deep opposite the shoulder, which just gives it enough room to not rub against the eschetion, so I literally filed a touch out of each blank on opposite to shoulder and bingo every key I'd cut even off universals all worked! Hope this helps someone out in the future

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...