Jump to content

Recommended Posts

Does anyone on here use the keyline ninja total? I'm after a bit of feedback regarding how easy it is to use, and also whether it will cut double sided cylinder keys? 

We need a key machine to start doing household dimple keys but ideally would like one that could replace our keyline retro cylinder machine?

 

Thanks in advance 

Link to comment
Share on other sites

I have the Ninja Total and it is my favorite machine.

It will cut the keys you require including single and double sided keys, laser and dimple.

I also have the silca Futura,Unocode 299 & Triax.

The triax is one hell of a machine but to use it to its full capacity you need expensive Silca software and it will only cut laser and dimple keys.

If you give Tony Wilkin a call at Davenport Burgess he can supply you the machine and provide all the technical back up you need.

Link to comment
Share on other sites

5 hours ago, almeriasecure said:

I have the Ninja Total and it is my favorite machine.

It will cut the keys you require including single and double sided keys, laser and dimple.

I also have the silca Futura,Unocode 299 & Triax.

The triax is one hell of a machine but to use it to its full capacity you need expensive Silca software and it will only cut laser and dimple keys.

If you give Tony Wilkin a call at Davenport Burgess he can supply you the machine and provide all the technical back up you need.

Thank you we always deal with Davenports anyway, I just wanted to guage people's experience of that model b4 I convince the boss to pay £9k

;)

Do you have the engraving attachment with yours?  I like the idea of it but I could save a bit of money if it's not that good of a product

 

Thanks in advance

Link to comment
Share on other sites

13 hours ago, Marcsmusings said:

Thank you we always deal with Davenports anyway, I just wanted to guage people's experience of that model b4 I convince the boss to pay £9k

;)

Do you have the engraving attachment with yours?  I like the idea of it but I could save a bit of money if it's not that good of a product

 

Thanks in advance

Buy all the jaws, cutters and tracers with your initial purchase. It will save you money in the long run.

The engraving is a must have.

Link to comment
Share on other sites

On 7/18/2021 at 12:38 PM, almeriasecure said:

I have the Ninja Total and it is my favorite machine.

It will cut the keys you require including single and double sided keys, laser and dimple.

I also have the silca Futura,Unocode 299 & Triax.

The triax is one hell of a machine but to use it to its full capacity you need expensive Silca software and it will only cut laser and dimple keys.

If you give Tony Wilkin a call at Davenport Burgess he can supply you the machine and provide all the technical back up you need.

 

thank you for you feedback, always here to help :-) 

Here is a " Recorded Live " Link to the machine that may help . 

 

 

Business Development Manager                                                                                                                                                                                                            

Direct Tel:  07572 216446                                                                                                                                                                                                                                     

Email: twilkin@davenport-burgess.com                                                                                                                                                                                                                                                                                                             

DAVENPORT BURGESS, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL                                                                                    

t:   01902 366448                                    f:   01902 602472   

e:   sales@davenport-burgess.com                 w:  www.davenport-burgess.com                    FOLLOW US ON SOCIAL MEDIA:  Facebook | Twitter

Link to comment
Share on other sites

  • 3 weeks later...

I’ve had one for 13 months now 

It cuts very good keys:

Ultion

WXM (special jaw and cutter)

MTL

ABS

I had a bit of trouble with Yale Platinum  again special jaw after a few attempts it didn’t work. Not had another go

Abus X60

ATK /Rockdoor inconsistent decoding 

The engraving is very good, but only one font and isn’t fast  ( that’s not really an issu for me as I’m not a heavy user and it’s so much more professional than handstamps  

Disappointing flow of Ultion customers via the brisant website (I bought the machine on the strength of referrals 

 

Link to comment
Share on other sites

On 8/6/2021 at 8:43 PM, danncus said:

Disappointing flow of Ultion customers via the brisant website (I bought the machine on the strength of referrals 

Been there, done that. I invested in a Futura Pro five years ago for the same reason. Probably haven't cut enough to pay for a set of jaws let alone the machine!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...