10p tubular Keys

[Ian platt]

Anyone cutting these or know where to order 

[Ian platt]

[Auto Key Wizard]

10p? is that reference to 10 pin

Most Radial Pin Tubular duplicate on to Silca CH9T, with the exception of Meroni.

We charge from £10 each

 

[Growster]

They need a special cutter to duplicate them on the Triax. Instacode shows just one 10 pin series, R.O.C. We have copied these successfully in the past, though not from the code.

[grahamparker]

2 hours ago, Auto Key Wizard said:

10p? is that reference to 10 pin

Most Radial Pin Tubular duplicate on to Silca CH9T, with the exception of Meroni.

We charge from £10 each

 

Bulldog and Camlock systems Will cut on CH9T but not advisable the outer and inner dimensions of the blade are not the same and the keys can get wedged in place when turned, had a few in that others have cut that have done this and the locks had to be replaced.

The key you have should duplicate ok on something like the Zephyr from SKS.

I have the adapter to cut these on the Triax Pro but the codes are not listed and i have never had the cutter for 10 pin radial keys only for the 7 pin.

 

[Ian platt]

Thanks everyone for info indeed it is for a bulldog  lock  customer has had it to  another. Shop  a locksmiths had 2 goes at it but failed   In the current climate trying not to turn any work down. But starting to get asked for more unusual stuff  like radial  keys and abloy   What machines are people using for abloy and granite ??

[grahamparker]

For Abloy we use the Silca Delta FO using the Silca multicopy jaw set that swaps onto it.

For Abus we use the SKM6000 dedicated granit machine with decoding block although we don't really need it as they are quite easy to decode by Eye.

The Delta with multicopy jaw will aslo allow duplication of granit keys.

[grahamparker]

1 hour ago, Ian platt said:

Thanks everyone for info indeed it is for a bulldog  lock  customer has had it to  another. Shop  a locksmiths had 2 goes at it but failed   In the current climate trying not to turn any work down. But starting to get asked for more unusual stuff  like radial  keys and abloy   What machines are people using for abloy and granite ??

Contact Bulldog direct for replacement keys (pretty expensive).