Jump to content

Anyone have a miraclone for sale??


Recommended Posts

If I had a endless pot of money I would :) what deal can you do as I only really want it for doing bikes I have other cloning machines so was trying to see if someone had a used one or I would have to buy the basic package plus another package which I don it need before I could buy the bike modules I want.... are you offering an early Christmas special?? ;)

Link to comment
Share on other sites

Didn't think you'd be up now, how did the Relay go?

Toss mate they were late ,true code pulled out a pile of pants , they were running out of time and i went do lost transit keys ,so all in all b@ll@cks to spare relay ,boxer ducati remotes ,till the summer , now lost keys ,they aint going nowhere till im done , they are selling it on saturday and hope to get one from the citroen dealer all in 24hrs pfrrrrrfff :)

Link to comment
Share on other sites

I am one of the very few locksmiths in the country who take on Motorcycle jobs, and I would suggest I am one of the very best. I don't know anyone who uses Miraclone for bike jobs, I doubt you know why but the lads capable of doing the job know exactly why they don't use it.

 

I'm also one of the minority that do motorbikes, I'm also one of the best, but I don't use Miraclone either...

Link to comment
Share on other sites

There seem to be a few of us on here that do bikes.

If your working on Bike ecu's they are not the easiest things to deal with. So if your not used to dealing with them it's worth getting a couple of scrap ones to play with first.

You will see more Hondas than anything else. No software shows you the locations of all the EPROMs in these ecus so if your not sure then ask I'm sure one of us will help you.

Also closing them after having worked on them is a consideration many over look. I personally use a pcb spray sealant then a layer of silicone then finish with a black two part Polyurethane plastic so you can hardly see I've been there. I've seen plenty that have been worked on previously and left with the pcb exposed to the elements.

The picture attached is a Honda cbr600 ecu that I sorted out last week for a customer who sent there ecu of to a company in Poland to have new keys made. They received it back as shown in the picture with the keys cut wrongly and the ecu looking like this. Not only that they hadn't even opened the ecu in the correct place or programmed the keys! This ecu has the keys stored in the MCU on the other side of the ECU.

IMG_0112.JPG

Link to comment
Share on other sites

Not even 10am and the panicked phone call has come already. They are even more panicked now because I have had an excellent week and am taking my son to the zoo instead of doing their van.

Did you visit the same Zoo as i visited,the very poor crap one with only 1 x dog , yes thats the one a Shitzu :))

Link to comment
Share on other sites

Hi all,

 

anyone have a miraclone they would like to sell??

Not bothered which packages it has on it.

 

 

 

Pete,

This is not a sales avenue for you, I offered him impartial advice which he is free to take or leave at his discretion.

All you ever post is advertisements for your products.

 

I am one of the very few locksmiths in the country who take on Motorcycle jobs, and I would suggest I am one of the very best. I don't know anyone who uses Miraclone for bike jobs, I doubt you know why but the lads capable of doing the job know exactly why they don't use it.

 

But I am willing to be proven wrong, I did yet another Goldwing last week, 2010. From the Miraclone Helpfile...

Where is the immo, what chip is it, which Miraclone module is needed?

 

I refrained from posting exactly which tools and modules the OP needed out of professional courtesy, if you don't like the fact that the Miraclone is vastly overpriced for the coverage it offers then drop the price or increase the coverage, don't moan that someone pointed it out on an OPEN forum.

 

I agree with Peter and think he was asking about one of his machines and not general advice. I think he should of replied, rather then just to leave it. 

 

The balance on here from the suppliers is very good, generally trying to help rather then to sell. With the one exception of one spammer who was spoken to about high jacking threads I can't think of anyone else who has over steeped the mark. That said about spamming he has put a lot of videos and bits to help people with his machines, he is also there for answering questions. Your personal issues with Peter/Neil will make other suppliers think twice be commenting.

 

Not sure you would of responded the same if it would of been about an RW4 or something else. 

 

What we don't want is suppliers not contributing or being scared to because of how it will look or thrown back at them later.

I think if people ask or got problems then why shouldn't a supplier not respond. 

 

I'm sure you will disagree and come back with a long response and some shit trying to prove me wrong, with or without the help of your two mates but I felt it had to be said. (I just don't know its you your Matt all the fucking time)

Link to comment
Share on other sites

If a forum member is about to buy a machine and I know of a cheaper option that will give the same or better coverage with the same or better reliability you can be sure that I will do that forum member a favour and inform them.

 

This forum is built on co-operation and advice, I think Locksafe is correct in highlighting there were and are better options available for his particular conundrum.

 

Im sure we all value the input of suppliers but at the end of the day this is a forum where we all discuss options for jobs and work and we help each other out not just to make money but also to save money

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...