Jump to content

Michael

Trade group users
  • Content Count

    1,900
  • Joined

  • Last visited

  • Days Won

    22

Everything posted by Michael

  1. Michael

    Pricing

    £7.50 including 30 characters, 30p per character above that.
  2. I've had these but stopped using them, some wouldn't go in lock, cut two the same for customer and one worked one didn't. Couldn't trust them so been using UL054 but got ESPC6 on order to try.
  3. Michael

    The Vistool Owners Club

    Have you tried wizard - New device or delete device at the main toolbar?
  4. UL064 is higher than UL054, try that instead.
  5. I have mine connected by ethernet cable and contactless still has that slight delay. It used to authorise instantly but now you have to wait for it to "go through". I've had a couple of occasions where the customer was virtually out the door and I had to call them back because it never authorised the payment.
  6. They have rotted, only way is to remove completely and rebuild the whole sole unit.
  7. If white spirit not working then probably had it, unless any of the specific patent cleaning products works. Don't look expensive so probably better off getting new shoes.
  8. Try a bit of white spirit, then a good polish with Mr Sheen.
  9. Vinyl cutting a logo with fine detail can be a right PIA, you sometimes lose some of the small details when weeding the material
  10. Michael

    TL key blank

    I always use genuine blanks from Citysafe for these, and always put them in the clamp using the bottom groove, never have a problem anymore.
  11. Michael

    Diamonds are forever?

    Sorry, totally misunderstood the question!!!!
  12. Michael

    Diamonds are forever?

    I don't paint either. I only infill with paint on engravers brass ( memorial plaques) when cut with a carbide cutter. A rotating diamond won't cut deep enough to fill. I use drag diamond on aluminium trophy plaques and a rotating diamond usually on pet discs or nickel plated plinth bands on cups.
  13. JMA YA27D XH1223 (HD hook number) Ilco 1531
  14. Michael

    Opsial key ID

    Looks a bit like ASEC2?
  15. Michael

    Trophy plates

    Probably a smaller box and £4.95 carriage
  16. Michael

    Trophy plates

    Glenway have them
  17. Michael

    Instacode Live - FREE Coupon / Code

    I wondered about trying this if it's for 1 year, but what's the code for option 1?
  18. Michael

    Key ID

    Aldridges have an EVVA department I think?
  19. Michael

    Garage T handle

    I know nothing about cut to code but if the blank is 83p can you not put 83 in front of the code i.e. 83723? Like L&F codes???
  20. Michael

    Garage T handle

    Regent used to be HD 19C but sometimes HD 136H (Henderson) will do it.
  21. Michael

    Garage T handle

    Cardale, Hormann, Garador are a few more names to try??
  22. Michael

    CUTTER OR DIAMOND

    I've started using a diamond rotated but cut the feed rate down to 0.2 or 0.3. Seems to dig a little deeper.
  23. Michael

    KEY BLANKS

    Can't remember the last time I cut a 1A!!!!
  24. But I'm talking about cutting approximately 5 keys and there is a significant blunting of the cutter! That's not sustainable. I don't cut many but I've not had any back yet, including a window fitter that had 10 cut for a door in London that he had changed, all cut on JMA blanks, all worked and cutter felt as good on the last as it did on the first.
×